Wed, 15 May 2024 17:44:27 +0000 For Hadley air horns with 7/16 thread connection.

Extended angle coupling for 1/4 inch tube.
With compression fitting for 1/4 inch hose and 7/16-24 UNF male thread.

The male thread is straight.
The housing of the coupling is brass.

So you can screw the coupling into a 7/16-24 UNF input and connect a 1/4 inch hose to it.
This coupling can be used by fastening the hose using the sleeve, O-ring and tighten the nut. The hose can be removed by unscrewing the nut again.

Abbreviations:

UNF: Unified National Fine. Fine wire mainly used in the US
1/4 inch hose: Inch size hose comes (6.35mm)]]> Sun, 28 Apr 2024 10:53:17 +0000 T-stuk naar 2x 10mm slang

T-stuk om direct in te draaien naar bijvoorbeeld twee luchthoorns.
Dit T-stuk kan direct in de uitgaang van ons "groot ventiel" gedraaid worden.

Levering:
1x T stuk 3/8 naar 2x10mm PTC


 

Product informatie
Materiaal	kunststof
Draad ingang	3/8 BSP (Gas)
uitgang (slang)	2x 10mm
Max. druk	10bar

]]> Wed, 15 May 2024 08:50:33 +0000 Wed, 15 May 2024 17:44:27 +0000 This quick connector makes it possible to disconnect a component (air horn) from the air source without loss of pressure.

The female thread on both sides is 1/8 BSP .
The coupling housing is nickel-plated brass.

You can screw a 1/8 BSP coupling on both sides of the quick coupling.

This shortcut can be used easily.
Screw a 1/8 BSPP coupling on both sides of the quick connector and connect your pneumatic parts.
The quick coupling makes it possible to disconnect a component (air horn) from the air source without loss of pressure.

Abbreviations:

BSP: British Standard Pipe, also called Gas Wire.
BSPP: British Standard Pipe Parallel, also called Gas Wire. (Parallel = straight)

More information about hose sizes and threads can be found here: About Thread]]> Fri, 04 Nov 2022 16:00:03 +0000